Tinysine Serial Bluetooth 4.0 BLE Module Communicating with iphone
http://www.tinyosshop.com/
Tinysine Serial Bluetooth 4.0 BLE Module - iBeacon IOS/Iphone/Andorid
This small size Bluetooth 4.0 TTL transceiver module allows your target device communicate with your iPhone/iPAD,Android 4.3 above devices. It's easy to use and completely encapsulated. You can set it as slave or master. You can use AT command set the baudrate.
PIN define: STATE -You can connect a external LED to indicate the bluetooth state. It same as the state LED on the module. RXD -Receive data TXD -Send data GND -Power ground VCC -DC power in (3.3V-6VDC) KEY -Turn on/off this module by this pin.
Specifications: TTL data transparent transfer between a host Bluetooth device(IOS or Android 4.3). Ultra-low standby power consumption 400uA - 800uA Default Baud Rate: 9600,8,1,n. Coverage up to 60 meters Built in antenna Power input: 3.6V-6VDC(Can not higher than 6V)
Tinysine Serial Bluetooth 4.0 BLE Module - iBeacon IOS/Iphone/Andorid
This small size Bluetooth 4.0 TTL transceiver module allows your target device communicate with your iPhone/iPAD,Android 4.3 above devices. It's easy to use and completely encapsulated. You can set it as slave or master. You can use AT command set the baudrate.
PIN define: STATE -You can connect a external LED to indicate the bluetooth state. It same as the state LED on the module. RXD -Receive data TXD -Send data GND -Power ground VCC -DC power in (3.3V-6VDC) KEY -Turn on/off this module by this pin.
Specifications: TTL data transparent transfer between a host Bluetooth device(IOS or Android 4.3). Ultra-low standby power consumption 400uA - 800uA Default Baud Rate: 9600,8,1,n. Coverage up to 60 meters Built in antenna Power input: 3.6V-6VDC(Can not higher than 6V)
